If ControlStart is set to 1, then the percentage value of the measure that is bound to the meter controls the starting position of the line. If ControlAngle is set to 0, then the measure does not control the angle of the line, which will be static at the value in StartAngle. If ControlAngle is 1 (default), then the percentage value of the measure that is bound to the meter controls the angle of the line (or the fill rotation if Solid=1) starting at StartAngle for RotationAngle radians. If set to 1, meter will fill the meter with LineColor from StartAngle to the current MeasureName percentage value. Width in pixels of the line when Solid is 0. The length is always measured from the center of rotation, regardless of the LineStart option. LineStartĭefines the distance in pixels from the center of rotation at which the line starts. Use a negative value for counter-clockwise rotation. This defines the distance in radians from StartAngle that the meter will travel around the circle when the measure value is 100%. The size of the rotation angle in radians for the line. The zero angle is to the right of the center. This defines the starting point on the circle that will be treated as zero percent. The starting angle in radians for the line. Note: If MeasureName is not specified, then the value is in effect always 100%, which can be used for instance to draw a circle or other curved solid. The measure must be able to return percentual values. Name of the measure whose percentual value controls the amount of rotation. The values for StartAngle and RotationAngle are defined in Radians Options General meter optionsĪll general meter options are valid. Meter=Roundline displays a line or solid fill that rotates in a circle around a point, based on a measure value.

Rainmeter analog clock